View SM5009CN2S_1310646.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

SM5009 series Crystal Oscillator Module ICs
OVERVIEW
The SM5009 series are crystal oscillator module ICs that incorporate low crystal current type oscillating circuit to limit oscillator-stage current, so that they can reduce crystal current lower than the existing products. Since the oscillating circuit has oscillator capacitors with excellent frequency response and feedback resistor built-in, just connecting crystal realizes stable fundamental oscillation responding up to 40MHz. The SM5009 series are ideal for SMD type crystal oscillator using a strip-shaped crystal blank.
FEATURES
I I I
I I I I
I
Low crystal current oscillator Up to 40MHz operating frequency range (fundamental oscillation) Operating supply voltage range * 3V operation: 2.7 to 3.6V * 5V operation: 4.5 to 5.5V -40 to 85C operating temperature range Oscillation capacitors CG, CD built-in Inverter amplifier feedback resistor built-in Standby function * Oscillator stops (AL series), high impedance in standby mode Low standby current
I I
I I
I I I
* Power-save pull-up resistor built-in (AL series) Frequency divider built-in (fO, fO/2, fO/4, fO/8, fO/16, fO/32 determined by internal connection) Output drive capability * ALx, ANx, AKx, CNx: 16mA (VDD = 4.5V) * AHx: 4mA (VDD = 4.5V) Output load: CL = 50pF max. Output duty level * CMOS level (1/2 VDD): ALx, ANx, AHx, CNx * TTL level (1.4V): AKx Molybdenum-gate CMOS process 8-pin SOP (SM5009xxxS) Chip form (CF5009xxx)
Standby mode Output frequency fO fO/2 fO/4 fO/8 fO/16 fO/32 fO fO/2 fO/4 fO/8 fO/16 fO/32 fO fO/2 fO fO/2 fO fO/2 fO/4 fO/8 INH Input level Oscillator stop function Output state
SERIES CONFIGURATION
Version1 3V operation 5V operation Recommended Recommended Output Output Output operating operating load3 (max) load3 (max) duty level frequency frequency [pF] [pF] range2 [MHz] range2 [MHz]
CF5009AL1 CF5009AL2 CF5009AL3 CF5009AL4 CF5009AL5 CF5009AL6 CF5009AN1 CF5009AN2 CF5009AN3 CF5009AN4 CF5009AN5 CF5009AN6 CF5009CN1 CF5009CN2 CF5009AK1 CF5009AK2 CF5009AH1 CF5009AH2 CF5009AH3 CF5009AH4
Up to 40
50
Up to 40
50
CMOS
CMOS
Yes
Hi-Z
CMOS Up to 40 30 Up to 40 50 CMOS/TTL
TTL
No
Hi-Z
Up to 30 -
15 -
Up to 30 Up to 40
50 15
CMOS TTL
TTL TTL
No No
Hi-Z Hi-Z
Up to 16
15
Up to 30
15
CMOS
TTL
No
Hi-Z
1. Package devices (8-pin SOP) have designation SM5009xxxS. 2. The recommended operating frequency is a yardstick value derived from the crystal used for NPC characteristics authentication. However, the oscillator frequency band is not guaranteed. Specifically, the characteristics can vary greatly due to crystal characteristics and mounting conditions, so the oscillation characteristics of components must be carefully evaluated. 3. Output load value is the maximum load capacitance that allows drive.
APPLICATIONS
I
ORDERING INFORMATION
Device SM5009xxxS CF5009xxx-1 Package 8-pin SOP Chip form
SMD type crystal oscillator module
NIPPON PRECISION CIRCUITS INC.--1
SM5009 series
PAD LAYOUT
(Unit: m)
PINOUT
(Top view)
VDD
Q
(920,1220)
Y
INH XT XT
1 2 3 4
8 7 6 5
VDD NC NC Q
(0,0)
INH XT XT VSS X
Chip size: 0.92 x 1.22 mm Chip thickness: 300 30 m Chip base: VDD level
PIN DESCRIPTION and PAD DIMENSIONS
Number Name I/O Description Output state control input. Standby mode when LOW, pull-up resistor built-in. In the case of the CF5009ALx, the oscillator stops and power-save pull-up resistor built in to reduce current consumption at standby mode. Amplifier input. Amplifier output. Ground Output. Output frequency (fO, fO/2, fO/4, fO/8, fO/16, fO/32) determined by internal connection No connection No connection Supply voltage Crystal oscillator connection pins. Crystal oscillator connected between XT and XT Pad dimensions [m] X 195 385 575 766 765 - - 162 Y 212 212 212 212 1062 - - 1062
1 2 3 4 5 6 7 8
INH XT XT VSS Q NC NC VDD
HA5009
I I O - O - - -
VSS
NIPPON PRECISION CIRCUITS INC.--2
SM5009 series
PACKAGE DIMENSIONS
(Unit: mm) * 8-pin SOP
0.15 + 0.1
- 0.05
4.4 0.2
6.2 0.3
0.695typ 5.2 0.3 0.05 0.05
1.5
0.1
1.27 0.10 0.4 0.1 0.12 M
0.4 0.2
0 to 10
BLOCK DIAGRAM
VDD VSS
XT
CGp Rf CDp 1/2 1/2 1/2 1/2 1/2
XT
CGn CDn
Q
INH
Notes. The SM5009 series reduce crystal current by limiting driving current of oscillating-stage inverter and inhibiting oscillating amplitude. Depending on the characteristics of using crystal or the mounting condition, they may not oscillate normally. Please evaluate the oscillation start-up characteristics adequately with your actual device.
NIPPON PRECISION CIRCUITS INC.--3
SM5009 series
FUNCTIONAL DESCRIPTION
Standby Function
5009 ALx series When INH goes LOW, the oscillator stops and the oscillator output on Q becomes high impedance. 5009AHx, AKx, ANx, CNx series When INH goes LOW, the output on Q becomes high impedance, but internally the oscillator does not stop.
Version ALx series AHx, AKx, ANx, CNx series INH HIGH (or open) LOW HIGH (or open) LOW Q Any fO , fO/2, fO/4, fO/8, fO/16 or fO/32 output frequency High impedance Any fO , fO/2, fO/4, fO/8, fO/16 or fO/32 output frequency High impedance Oscillator Normal operation Stopped Normal operation Normal operation
Power-save Pull-up Resistance (ALx series only)
The INH pull-up resistance changes in response to the input level (HIGH or LOW). When INH goes LOW (standby state), the pull-up resistance becomes large to reduce the current consumption during standby.
Current consumption and Output waveform with NPC's standard crystal
Cb
f [MHz] 30 40
R [] 17.2 16.8
L [mH] 4.36 2.90
Ca [fF] 6.46 5.47
Cb [pF] 2.26 2.08
L
Ca
R
NIPPON PRECISION CIRCUITS INC.--4
SM5009 series
SPECIFICATIONS
Absolute Maximum Ratings
VSS = 0V unless otherwise noted.
Parameter Supply voltage range Input voltage range Output voltage range Operating temperature range Storage temperature range Output current Power dissipation Symbol VDD VIN VOUT Topr Tstg IOUT PD 8-pin SOP Chip form 8-pin SOP Condition Rating -0.5 to +7.0 -0.5 to VDD + 0.5 -0.5 to VDD + 0.5 -40 to +85 -65 to +150 -55 to +125 25 500 Unit V V V C C mA mW
Recommended Operating Conditions
VSS = 0V unless otherwise noted.
Parameter Symbol Version f 30MHz f 16MHz f 40MHz f 40MHz f 30MHz f 40MHz Chip form ALx 8-pin SOP Input voltage VIN All version AHx f 30MHz, 4.5V VDD 5.5V f 16MHz, 2.7V VDD 3.6V f 30MHz 30MHz < f 40MHz Chip form ANx 8-pin SOP Operating temperature TOPR CNx f 40MHz, 2.7V VDD < 4.5V f 40MHz, 4.5V VDD 5.5V f 40MHz, 2.7V VDD < 4.5V f 40MHz, 4.5V VDD 5.5V f 30MHz, 4.5V VDD 5.5V f 30MHz, 2.7V VDD < 4.5V f 30MHz, 4.5V VDD 5.5V f 40MHz, 2.7V VDD 5.5V Chip form ALx 8-pin SOP f 30MHz, 2.3V VDD 2.7V f 20MHz, 2.25V VDD 2.75V f 40MHz, 2.7V VDD 5.5V f 30MHz, 2.7V VDD 5.5V f 14.4MHz, 2.4V VDD 2.7V f 30MHz f 20MHz f 40MHz f 14.4MHz Condition Rating min 4.5 2.7 4.5 2.7 2.7 2.7 2.3 2.25 2.7 2.4 VSS - 40 - 20 - 40 - 20 - 20 - 40 - 20 - 20 - 40 - 10 - 40 - 40 - 20 - 20 - 20 - 40 - 20 typ - - - - - - - - - - - - - - - - - - - - - - - - - - - - max 5.5 3.3 5.5 5.5 5.5 5.5 2.7 2.75 5.5 2.7 VDD + 85 + 80 + 85 + 80 + 80 + 85 + 80 + 80 + 85 + 70 + 85 + 85 + 80 + 80 + 80 + 85 + 80 C C C V C C V Unit
AHx AKx ANx Supply voltage VDD CNx
V V V V
AKx
NIPPON PRECISION CIRCUITS INC.--5
SM5009 series
Electrical Characteristics
5009ALx series 3V operation: VDD = 2.7 to 3.3V, VSS = 0V, Ta = -40 to 85C unless otherwise noted.
Rating Parameter HIGH-level output voltage LOW-level output voltage HIGH-level input voltage LOW-level input voltage Output leakage current Symbol VOH VOL VIH VIL IZ Condition min Q: Measurement cct 1, IOH = 8mA Q: Measurement cct 1, IOL = 8mA INH INH Q: Measurement cct 2, INH = LOW, VOH = VDD Q: Measurement cct 2, INH = LOW, VOL = VSS CF5009AL1 CF5009AL2 INH = open, Measurement cct 3, load cct 2, CL = 15pF, 40MHz crystal oscillator CF5009AL3 CF5009AL4 CF5009AL5 CF5009AL6 Current consumption IDD SM5009AL1S SM5009AL2S INH = open, Measurement cct 3, load cct 2, CL = 15pF, 40MHz crystal oscillator, Ta = -20 to +80C SM5009AL3S SM5009AL4S SM5009AL5S SM5009AL6S Standby current INH pull-up resistance Negative resistance Feedback resistance Built-in capacitance IST RUP1 RUP2 -RL Rf CG CD INH = VSS, Measurement cct 3 Measurement cct 4, VDD = 3V, INH = VSS Measurement cct 4, VDD = 3V, INH = 2.1V VDD = 3V, Ta = 25C, 40MHz Measurement cct 5 Design value. A monitor pattern on a wafer is tested. 9.3 10 10.7 pF 2.2 - 0.7VDD - - - - - - - - - - - - - - - - 0.6 40 - 0.4 5.58 typ - - - - - - 8 5 4 3 3 2 8 5 4 3 3 2 2 - - -200 - 6 max - 0.4 - 0.3VDD 10 A 10 17 11 9 7 6 5 mA 17 11 9 7 6 5 5 12 200 - 1.1 6.42 A M k M pF V V V V Unit
NIPPON PRECISION CIRCUITS INC.--6
SM5009 series 5V operation: VDD = 4.5 to 5.5V, VSS = 0V, Ta = -40 to 85C unless otherwise noted.
Rating Parameter HIGH-level output voltage LOW-level output voltage HIGH-level input voltage LOW-level input voltage Output leakage current Symbol VOH VOL VIH VIL IZ Condition min Q: Measurement cct 1, IOH = 16mA Q: Measurement cct 1, IOL = 16mA INH INH Q: Measurement cct 2, INH = LOW, VOH = VDD Q: Measurement cct 2, INH = LOW, VOL = VSS CF5009AL1 CF5009AL2 INH = open, Measurement cct 3, load cct 2, CL = 15pF, 40MHz crystal oscillator CF5009AL3 CF5009AL4 CF5009AL5 CF5009AL6 Current consumption IDD SM5009AL1S SM5009AL2S INH = open, Measurement cct 3, load cct 2, CL = 15pF, 40MHz crystal oscillator, Ta = -20 to +80C SM5009AL3S SM5009AL4S SM5009AL5S SM5009AL6S Standby current INH pull-up resistance Negative resistance Feedback resistance Built-in capacitance IST RUP1 RUP2 -RL Rf CG CD INH = VSS, Measurement cct 3 Measurement cct 4, VDD = 5V, INH = VSS Measurement cct 4, VDD = 5V, INH = 3.5V VDD = 5V, Ta = 25C, 40MHz Measurement cct 5 Design value. A monitor pattern on a wafer is tested. 9.3 10 10.7 pF 4.0 - 0.7VDD - - - - - - - - - - - - - - - - 0.3 40 - 0.4 5.58 typ - - - - - - 12 8 6 5 5 4 12 8 6 5 5 4 6 - - -400 - 6 max - 0.4 - 0.3VDD 10 A 10 26 17 13 11 10 9 mA 26 17 13 11 10 9 15 6 200 - 1.1 6.42 A M k M pF V V V V Unit
NIPPON PRECISION CIRCUITS INC.--7
SM5009 series 5009ANx/CNx series 3V operation: VDD = 2.7 to 3.3V, VSS = 0V, Ta = -20 to 80C unless otherwise noted.
Rating Parameter Symbol Condition min SM5009AN1S, CF5009AN1 SM5009AN2S, CF5009AN2 HIGH-level output voltage VOH Q: Measurement cct 1, IOH = 8mA SM5009AN3S, CF5009AN3 SM5009AN4S, CF5009AN4 SM5009AN5S, CF5009AN5 SM5009AN6S, CF5009AN6 SM5009CN1S, CF5009CN1 SM5009CN2S, CF5009CN2 2.2 typ - max - Unit
V 2.1 - -
LOW-level output voltage HIGH-level input voltage LOW-level input voltage Output leakage current
VOL VIH VIL IZ
Q: Measurement cct 1, IOL = 8mA INH INH Q: Measurement cct 2, INH = LOW, VOH = VDD Q: Measurement cct 2, INH = LOW, VOL = VSS SM5009AN1S, CF5009AN1 SM5009AN2S, CF5009AN2 INH = open, Measurement cct 3, load cct 2, CL = 15pF, 40MHz crystal oscillator SM5009AN3S, CF5009AN3 SM5009AN4S, CF5009AN4 SM5009AN5S, CF5009AN5 SM5009AN6S, CF5009AN6 INH = open, Measurement cct 3, load cct 2, CL = 15pF, 30MHz crystal oscillator, Ta = -10 to +70C SM5009CN1S, CF5009CN1 SM5009CN2S, CF5009CN2
- 2.0 - - - - - - - - - - - 40 - 0.4 5.58
- - - - - 8 5 4 3 3 2 7 4 - -100 - 6 10
0.4 - 0.3 10
V V V A
10 17 11 9 7 6 5 15 9 200 - 1.1 6.42 10.7 k M pF pF mA
Current consumption
IDD
INH pull-up resistance Negative resistance Feedback resistance Built-in capacitance
RUP -RL Rf CG CD
Measurement cct 4, VDD = 3V, INH = VSS VDD = 3V, Ta = 25C, 40MHz Measurement cct 5 Design value. A monitor pattern on a wafer is tested.
9.3
NIPPON PRECISION CIRCUITS INC.--8
SM5009 series 5V operation: VDD = 4.5 to 5.5V, VSS = 0V, Ta = -40 to 85C unless otherwise noted.
Rating Parameter Symbol Condition min SM5009AN1S, CF5009AN1 SM5009AN2S, CF5009AN2 HIGH-level output voltage VOH Q: Measurement cct 1, IOH = 16mA SM5009AN3S, CF5009AN3 SM5009AN4S, CF5009AN4 SM5009AN5S, CF5009AN5 SM5009AN6S, CF5009AN6 SM5009CN1S, CF5009CN1 SM5009CN2S, CF5009CN2 4.0 typ - max - Unit
V 3.9 - -
LOW-level output voltage HIGH-level input voltage LOW-level input voltage Output leakage current
VOL VIH VIL IZ
Q: Measurement cct 1, IOL = 16mA INH INH Q: Measurement cct 2, INH = LOW, VOH = VDD Q: Measurement cct 2, INH = LOW, VOL = VSS CF5009AN1 CF5009AN2 INH = open, Measurement cct 3, load cct 2, CL = 15pF, 40MHz crystal oscillator CF5009AN3 CF5009AN4 CF5009AN5 CF5009AN6 SM5009AN1S
- 2.0 - - - - - - - - - - - - - - - - - 40 - 0.4 5.58
- - - - - 12 8 6 5 5 4 12 8 6 5 5 4 10 7 - -210 - 6 10
0.4 - 0.8 10
V V V A
10 26 17 13 11 10 9 26 17 13 11 10 9 22 15 200 - 1.1 6.42 10.7 k M pF pF mA
Current consumption
IDD INH = open, Measurement cct 3, load cct 2, CL = 15pF, 40MHz crystal oscillator, Ta = -20 to +80C
SM5009AN2S SM5009AN3S SM5009AN4S SM5009AN5S SM5009AN6S INH = open, Measurement cct 3, load cct 2, CL = 15pF, 30MHz crystal oscillator SM5009CN1S, CF5009CN1 SM5009CN2S, CF5009CN2
INH pull-up resistance Negative resistance Feedback resistance Built-in capacitance
RUP -RL Rf CG CD
Measurement cct 4, VDD = 5V, INH = VSS VDD = 5V, Ta = 25C, 40MHz Measurement cct 5 Design value. A monitor pattern on a wafer is tested.
9.3
NIPPON PRECISION CIRCUITS INC.--9
SM5009 series 5009AKx series VDD = 4.5 to 5.5V, VSS = 0V, Ta = -40 to 85C unless otherwise noted.
Rating Parameter HIGH-level output voltage LOW-level output voltage HIGH-level input voltage LOW-level input voltage Output leakage current Symbol VOH VOL VIH VIL IZ Condition min Q: Measurement cct 1, IOH = 16mA Q: Measurement cct 1, IOL = 16mA INH INH Q: Measurement cct 2, INH = LOW, VOH = VDD Q: Measurement cct 2, INH = LOW, VOL = VSS SM5009AK1S Current consumption IDD INH = open, Measurement cct 3, load cct 1, CL = 15pF, 40MHz crystal oscillator, Ta = -20 to +80C Measurement cct 4, VDD = 5V, INH = VSS VDD = 5V, Ta = 25C, 40MHz Measurement cct 5 Design value. A monitor pattern on a wafer is tested. 9.3 10 10.7 pF CF5009AK1 SM5009AK2S CF5009AK2 INH pull-up resistance Negative resistance Feedback resistance Built-in capacitance RUP -RL Rf CG CD 4.0 - 2.0 - - - - - - - 40 - 0.4 5.58 typ - - - - - - 12 12 8 8 - -210 - 6 max - 0.4 - 0.8 10 A 10 26 26 mA 17 17 200 - 1.1 6.42 k M pF V V V V Unit
NIPPON PRECISION CIRCUITS INC.--10
SM5009 series 5009AHx series 3V operation: VDD = 2.7 to 3.3V, VSS = 0V, Ta = -20 to 80C unless otherwise noted.
Rating Parameter HIGH-level output voltage LOW-level output voltage HIGH-level input voltage LOW-level input voltage Output leakage current Symbol VOH VOL VIH VIL IZ Condition min Q: Measurement cct 1, IOH = 2mA Q: Measurement cct 1, IOL = 2mA INH INH Q: Measurement cct 2, INH = LOW, VOH = VDD Q: Measurement cct 2, INH = LOW, VOL = VSS SM5009AH1S CF5009AH1 INH = open, Measurement cct 3, load cct 2, CL = 15pF, 16MHz crystal oscillator SM5009AH2S CF5009AH2 SM5009AH3S CF5009AH3 SM5009AH4S CF5009AH4 2.2 - 2.0 - - - - - typ - - - - - - 4.5 3 max - 0.4 - 0.3 10 A 10 10 7 mA - 1.5 3.5 V V V V Unit
Current consumption
IDD
INH pull-up resistance Negative resistance Feedback resistance Built-in capacitance
RUP -RL Rf CG CD
Measurement cct 4, VDD = 3V, INH = VSS VDD = 3V, Ta = 25C, 16MHz Measurement cct 5 Design value. A monitor pattern on a wafer is tested.
40 - 0.4 5.58 9.3
- -450 - 6 10
200 - 1.1 6.42 10.7
k M pF pF
5V operation: VDD = 4.5 to 5.5V, VSS = 0V, Ta = -40 to 85C unless otherwise noted.
Rating Parameter HIGH-level output voltage LOW-level output voltage HIGH-level input voltage LOW-level input voltage Output leakage current Symbol VOH VOL VIH VIL IZ Condition min Q: Measurement cct 1, IOH = 4mA Q: Measurement cct 1, IOL = 4mA INH INH Q: Measurement cct 2, INH = LOW, VOH = VDD Q: Measurement cct 2, INH = LOW, VOL = VSS SM5009AH1S CF5009AH1 INH = open, Measurement cct 3, load cct 2, CL = 15pF, 30MHz crystal oscillator SM5009AH2S CF5009AH2 SM5009AH3S CF5009AH3 SM5009AH4S CF5009AH4 4.0 - 2.0 - - - - - typ - - - - - - 9 6 max - 0.4 - 0.8 10 A 10 20 13 mA - 4 9 V V V V Unit
Current consumption
IDD
INH pull-up resistance Negative resistance Feedback resistance Built-in capacitance
RUP -RL Rf CG CD
Measurement cct 4, VDD = 5V, INH = VSS VDD = 5V, Ta = 25C, 30MHz Measurement cct 5 Design value. A monitor pattern on a wafer is tested.
40 - 0.4 5.58 9.3
- -340 - 6 10
200 - 1.1 6.42 10.7
k M pF pF
NIPPON PRECISION CIRCUITS INC.--11
SM5009 series
Switching Characteristics
5009ALx series 3V operation: VDD = 2.7 to 3.3V, VSS = 0V, Ta = -40 to 85C unless otherwise noted.
Rating Parameter Symbol Condition min Measurement cct 3, load cct 2, 0.1VDD to 0.9VDD , CL = 15pF tr1 Measurement cct 3, load cct 2, 0.1VDD to 0.9VDD , VDD = 2.3 to 2.7V, Ta = -20 to +80C, CL = 15pF Measurement cct 3, load cct 2, 0.1VDD to 0.9VDD , CL = 30pF Output rise time tr2 Measurement cct 3, load cct 2, 0.1VDD to 0.9VDD , VDD = 2.4 to 2.7V, Ta = -20 to +80C, CL = 30pF Measurement cct 3, load cct 2, 0.1VDD to 0.9VDD , VDD = 3.0 to 3.6V, f 30MHz, CL = 50pF Measurement cct 3, load cct 2, 0.2VDD to 0.8VDD , VDD = 3.0 to 3.6V, f 40MHz, CL = 50pF Measurement cct 3, load cct 2, 0.9VDD to 0.1VDD , CL = 15pF tf1 Measurement cct 3, load cct 2, 0.9VDD to 0.1VDD , VDD = 2.3 to 2.7V, Ta = -20 to +80C, CL = 15pF Measurement cct 3, load cct 2, 0.9VDD to 0.1VDD , CL = 30pF Output fall time tf2 Measurement cct 3, load cct 2, 0.9VDD to 0.1VDD , VDD = 2.4 to 2.7V, Ta = -20 to +80C, CL = 30pF Measurement cct 3, load cct 2, 0.9VDD to 0.1VDD , VDD = 3.0 to 3.6V, f 30MHz, CL = 50pF Measurement cct 3, load cct 2, 0.8VDD to 0.2VDD , VDD = 3.0 to 3.6V, f 40MHz, CL = 50pF Measurement cct 3, load cct 2, VDD = 3V, f 40MHz, Ta = 25C, CL = 30pF Duty1 Output duty cycle1 Measurement cct 3, load cct 2, VDD = 2.4V, f 14.4MHz, Ta = 25C, CL = 30pF CF5009ALx only, Measurement cct 3, load cct 2, VDD = 2.5V, f 30MHz, Ta = 25C, CL = 15pF CF5009ALx only, Measurement cct 3, load cct 2, VDD = 3.3V, f 30MHz, Ta = 25C, CL = 50pF CF5009ALx only, Measurement cct 3, load cct 2, VDD = 3.3V, f 40MHz, Ta = 25C, CL = 50pF Output disable delay time2 Output enable delay time2 tPLZ tPZL Measurement cct 6, load cct 2, VDD = 3V, Ta = 25C, CL 15pF CF5009ALx Measurement cct 3 SM5009ALxS Measurement cct 3, Ta = -20 to +80C Maximum operating frequency fmax Measurement cct 3, Ta = -20 to +80C SM5009ALxS VDD = 2.4 to 2.7V, SM5009ALxS VDD = 2.3 to 2.7V, CF5009ALx VDD = 2.25 to 2.75V, CF5009ALx 30 40 14.4 30 20 - - - - - - - - - - MHz - - - - - - - - - - - - 45 40 40 45 40 - - 40 typ 3.5 4 5 5.5 5 3.5 3.5 4 5 5.5 5 3.5 - - - - - - - - max 9 13 12 16 12 12 9 13 12 16 12 12 55 60 60 55 60 100 100 - ns ns % ns ns Unit
tr3
tf3
Duty2
1. The duty cycle characteristic is checked the sample chips of each production lot. 2. Oscillator stop function is built-in. When INH goes LOW, normal output stops. When INH goes HIGH, normal output is not resumed until after the oscillator start-up time has elapsed.
NIPPON PRECISION CIRCUITS INC.--12
SM5009 series 5V operation: VDD = 4.5 to 5.5V, VSS = 0V, Ta = -40 to 85C unless otherwise noted.
Rating Parameter Symbol tr1 Output rise time tr2 tr3 tf1 Output fall time tf2 tf3 Output duty cycle1 Output disable delay time2 Output enable delay time2 Maximum operating frequency Duty tPLZ tPZL Measurement cct 3, load cct 2, 0.9VDD to 0.1VDD Measurement cct 3, load cct 2, 0.1VDD to 0.9VDD Condition min CL = 15pF CL = 30pF CL = 50pF CL = 15pF CL = 30pF CL = 50pF Measurement cct 3, load cct 2, VDD = 5V, Ta = 25C, CL = 50pF Measurement cct 6, load cct 2, VDD = 5V, Ta = 25C, CL 15pF CF5009ALx Measurement cct 3 fmax Measurement cct 3, Ta = -20 to +80C SM5009ALxS SM5009ALxS 30 40 - - - - MHz - - - - - - 45 - - 40 typ 2 3.5 4 2 3.5 4 - - - - max 4 7 8 4 7 8 55 100 100 - % ns ns ns ns Unit
1. The duty cycle characteristic is checked the sample chips of each production lot. 2. Oscillator stop function is built-in. When INH goes LOW, normal output stops. When INH goes HIGH, normal output is not resumed until after the oscillator start-up time has elapsed.
NIPPON PRECISION CIRCUITS INC.--13
SM5009 series 5009ANx/CNx series 3V operation: VDD = 2.7 to 3.3V, VSS = 0V, Ta = -20 to 80C unless otherwise noted.
Rating Parameter Symbol Condition min SM5009AN1S, CF5009AN1 SM5009AN2S, CF5009AN2 tr1 Measurement cct 3, load cct 2, 0.1VDD to 0.9VDD ,CL = 15pF SM5009AN3S, CF5009AN3 SM5009AN4S, CF5009AN4 SM5009AN5S, CF5009AN5 SM5009AN6S, CF5009AN6 SM5009CN1S, CF5009CN1 SM5009CN2S, CF5009CN2 SM5009AN1S, CF5009AN1 SM5009AN2S, CF5009AN2 tr2 Measurement cct 3, load cct 2, 0.1VDD to 0.9VDD ,CL = 30pF SM5009AN3S, CF5009AN3 SM5009AN4S, CF5009AN4 SM5009AN5S, CF5009AN5 SM5009AN6S, CF5009AN6 SM5009CN1S, CF5009CN1 SM5009CN2S, CF5009CN2 SM5009AN1S, CF5009AN1 SM5009AN2S, CF5009AN2 tf1 Measurement cct 3, load cct 2, 0.9VDD to 0.1VDD ,CL = 15pF SM5009AN3S, CF5009AN3 SM5009AN4S, CF5009AN4 SM5009AN5S, CF5009AN5 SM5009AN6S, CF5009AN6 SM5009CN1S, CF5009CN1 SM5009CN2S, CF5009CN2 SM5009AN1S, CF5009AN1 SM5009AN2S, CF5009AN2 tf2 Measurement cct 3, load cct 2, 0.9VDD to 0.1VDD ,CL = 30pF SM5009AN3S, CF5009AN3 SM5009AN4S, CF5009AN4 SM5009AN5S, CF5009AN5 SM5009AN6S, CF5009AN6 SM5009CN1S, CF5009CN1 SM5009CN2S, CF5009CN2 CL = 30 pF, SM5009ANxS, CF5009ANx CL = 15 pF, SM5009CNxS, CF5009CNx - typ 3.5 max 9 Unit
-
5
13
Output rise time - 5 12
ns
-
7
16
-
3.5
9
-
5
13
Output fall time - 5 12
ns
-
7
16
45 40 - - 40 30
- - - - - -
55 % 60 100 100 - MHz - ns ns
Output duty cycle1
Duty
Measurement cct 3, load cct 2, VDD = 3V, Ta = 25C
Output disable delay time Output enable delay time Maximum operating frequency
tPLZ tPZL fmax
Measurement cct 6, load cct 2, VDD = 3V, Ta = 25C, CL 15pF SM5009ANxS, CF5009ANx Measurement cct 3 Ta = -10 to +70C, SM5009CNxS, CF5009CNx
1. The duty cycle characteristic is checked the sample chips of each production lot.
NIPPON PRECISION CIRCUITS INC.--14
SM5009 series 5V operation: VDD = 4.5 to 5.5V, VSS = 0V, Ta = -40 to 85C unless otherwise noted.
Rating Parameter Symbol tr1 Output rise time tr2 tr3 tf1 Output fall time tf2 tf3 Output duty cycle1 Output disable delay time Output enable delay time Maximum operating frequency Duty tPLZ tPZL fmax Measurement cct 3, load cct 2, 0.9VDD to 0.1VDD Measurement cct 3, load cct 2, 0.1VDD to 0.9VDD Condition min CL = 15pF CL = 30pF CL = 50pF CL = 15pF CL = 30pF CL = 50pF Measurement cct 3, load cct 2, VDD = 5V, Ta = 25C, CL = 50pF Measurement cct 6, load cct 2, VDD = 5V, Ta = 25C, CL 15pF SM5009ANxS, CF5009ANx Measurement cct 3 SM5009CNxS, CF5009CNx 30 - - - - - - - - 45 - - 40 typ 2 3.5 4 2 3.5 4 - - - - max 4 7 8 4 7 8 55 100 100 - MHz % ns ns ns ns Unit
1. The duty cycle characteristic is checked the sample chips of each production lot.
5009AKx series VDD = 4.5 to 5.5V, VSS = 0V, Ta = -40 to 85C unless otherwise noted.
Rating Parameter Output rise time Output fall time Output duty cycle1 Output disable delay time Output enable delay time Maximum operating frequency Symbol tr tf Duty tPLZ tPZL fmax Condition min Measurement cct 3, load cct 1, 0.4V to 2.4V, CL = 15pF Measurement cct 3, load cct 1, 2.4V to 0.4V, CL = 15pF Measurement cct 3, load cct 1, VDD = 5V, Ta = 25C, CL = 15pF Measurement cct 6, load cct 1, VDD = 5V, Ta = 25C, CL 15pF Ta = -20 to +80C Measurement cct 3 Ta = -40 to +85C 30 - - - - 45 - - 40 typ 2 2 - - - - max 6 6 55 100 100 - MHz ns ns % ns ns Unit
1. The duty cycle characteristic is checked the sample chips of each production lot.
NIPPON PRECISION CIRCUITS INC.--15
SM5009 series 5009AHx series 3V operation: VDD = 2.7 to 3.3V, VSS = 0V, Ta = -20 to 80C unless otherwise noted.
Rating Parameter Output rise time Output fall time Output duty cycle1 Output disable delay time Output enable delay time Maximum operating frequency Symbol tr1 tf1 Duty tPLZ tPZL fmax Condition min Measurement cct 3, load cct 2, 0.1VDD to 0.9VDD , CL = 15pF Measurement cct 3, load cct 2, 0.9VDD to 0.1VDD , CL = 15pF Measurement cct 3, load cct 2, VDD = 3V, Ta = 25C, CL = 15pF Measurement cct 6, load cct 2, VDD = 3V, Ta = 25C, CL 15pF Measurement cct 3 - - 45 - - 16 typ 6 6 - - - - max 18 18 55 100 100 - ns ns % ns ns MHz Unit
1. The duty cycle characteristic is checked the sample chips of each production lot.
5V operation: VDD = 4.5 to 5.5V, VSS = 0V, Ta = -40 to 85C unless otherwise noted.
Rating Parameter Output rise time Output fall time Output duty cycle1 Output disable delay time Output enable delay time Maximum operating frequency Symbol tr1 tf1 Duty tPLZ tPZL fmax Condition min Measurement cct 3, load cct 2, 0.1VDD to 0.9VDD , CL = 15pF Measurement cct 3, load cct 2, 0.9VDD to 0.1VDD , CL = 15pF Measurement cct 3, load cct 2, VDD = 5V, Ta = 25C, CL = 15pF Measurement cct 6, load cct 2, VDD = 5V, Ta = 25C, CL 15pF Measurement cct 3 - - 45 - - 30 typ 4 4 - - - - max 12 12 55 100 100 - ns ns % ns ns MHz Unit
1. The duty cycle characteristic is checked the sample chips of each production lot.
NIPPON PRECISION CIRCUITS INC.--16
SM5009 series
MEASUREMENT CIRCUITS
Measurement cct 1
When measuring VOL
VDD R3 Q VSS
Measurement cct 4
3.0V or 5.0V VDD RUP = RUP1
When measuring VOH
VDD 0V VDD VOH 0V VDD VOL 0V R2
Signal Generator
R1
XT
VDD IPR
(VIL = 0V)
VSS
INH
V
VIH VIL
XT input waveform (10MHz)
RUP2 = VDD VIH IPR VIH : 2.1V(V DD = 3.0V) VIH : 3.5V(V DD = 5.0V) IPR
Q output
A
Q output
* 5009AKx, ALx, AN1, AN2 R1: 50 R2: 250(VDD = 4.5V), 275(VDD = 2.7V) R3: 256(VDD = 4.5V), 288(VDD = 2.7V) * 5009AN3 to AN6, CNx R1: 50 R2: 245(VDD = 4.5V), 262(VDD = 2.7V) R3: 256(VDD = 4.5V), 288(VDD = 2.7V) * 5009AHx R1: 50 R2: 1000(VDD = 4.5V), 1100(VDD = 2.7V) R3: 1025(VDD = 4.5V), 1150(VDD = 2.7V)
Measurement cct 5
VDD XT Rf = XT VSS VDD IRf
Measurement cct 2
IRf IZ VDD Q VSS IZ
A
A
Measurement cct 6
V
VOH VOL
VDD
Signal Generator
XT VSS
Q INH
Measurement cct 3
IDD IST
R1
A
XT X'tal XT INH VDD
Q VSS
R1: 50
NIPPON PRECISION CIRCUITS INC.--17
SM5009 series
Load cct 1
Load cct 2
R Q output CL
(Including probe capacitance)
Q output CL
(Including probe capacitance)
CL = 15pF: DUTY, IDD, tr, tf R = 400
CL = 15pF: DUTY, IDD, tr1, tf1 CL = 30pF: tr2, tf2 CL = 50pF: tr3, tf3
Switching Time Measurement Waveform
Output duty level (CMOS)
Q output
0.9VDD 0.1VDD TW
0.9VDD 0.1VDD
DUTY measurement voltage (0.5V DD)
tr
Output duty level (TTL)
tf
Q output
2.4V 0.4V TW
2.4V 0.4V
DUTY measurement voltage (1.4V )
tr
Output duty cycle (CMOS)
tf
Q output
TW T
DUTY measurement voltage (0.5VDD) DUTY= TW/ T 100 (%)
Output duty cycle (TTL)
Q output
TW T
DUTY measurement voltage (1.4V) DUTY= TW/ T 100 (%)
NIPPON PRECISION CIRCUITS INC.--18
SM5009 series
Output Enable/Disable Delay
INH
VIL
VIH
tPLZ Q output
INH input waveform
tPZL
tr = tf
10ns
Note (ALx series only): when the device is in standby, the oscillator stops. When standby is released, the oscillator starts and stable oscillator output occurs after a short delay.
NIPPON PRECISION CIRCUITS INC.--19
SM5009 series
Please pay your attention to the following points at time of using the products shown in this document. The products shown in this document (hereinafter "Products") are not intended to be used for the apparatus that exerts harmful influence on human lives due to the defects, failure or malfunction of the Products. Customers are requested to obtain prior written agreement for such use from NIPPON PRECISION CIRCUITS INC. (hereinafter "NPC"). Customers shall be solely responsible for, and indemnify and hold NPC free and harmless from, any and all claims, damages, losses, expenses or lawsuits, due to such use without such agreement. NPC reserves the right to change the specifications of the Products in order to improve the characteristic or reliability thereof. NPC makes no claim or warranty that the contents described in this document dose not infringe any intellectual property right or other similar right owned by third parties. Therefore, NPC shall not be responsible for such problems, even if the use is in accordance with the descriptions provided in this document. Any descriptions including applications, circuits, and the parameters of the Products in this document are for reference to use the Products, and shall not be guaranteed free from defect, inapplicability to the design for the mass-production products without further testing or modification. Customers are requested not to export or re-export, directly or indirectly, the Products to any country or any entity not in compliance with or in violation of the national export administration laws, treaties, orders and regulations. Customers are requested appropriately take steps to obtain required permissions or approvals from appropriate government agencies. NIPPON PRECISION CIRCUITS INC. 4-3, Fukuzumi 2-chome, Koto-ku, Tokyo 135-8430, Japan Telephone: +81-3-3642-6661 Facsimile: +81-3-3642-6698 http://www.npc.co.jp/ Email: sales@npc.co.jp
NC9801GE 2003.07
NIPPON PRECISION CIRCUITS INC.--20

▲Up To Search▲

Price & Availability of SM5009CN2S

	To Download SM5009CN2S Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .